TPU Polyurethane Material /Virgin Pure TPU Resin

• Material: PU
• Color: Transparent
• Transport Package: Plastic Bag
• Specification: According to Customer Requirement
• Trademark: PEPSON
• Origin: China
• Model NO.: 70~95A
• HS Code: 39269090
• Production Capacity: Long-Term Supply

Product Description

Specifications:
TPU granules, hardness, including: 80A/85A/90A/95A.

Features:
Normally including two categories: Polyester and polyether.
Hardness Shore 60A-72D.

Performance:
FDA certification;
Non-toxic, anti-wear ability (more wear than the POM and nylon), soft, high, silence, similar than the hardness of the rubber has a higher modulus of elasticity;
Good resistance to oil, hydrolysis, anti-UV (ozone), small swelling in non polarity solvent and fuel;
Good weather resistance (low temperature flexibility), without plasticizer; It can be dyed with good air permeability and moisture permeability;
TPU thermoplastic elastomers, high tension, high tensile, tough wear-resistant characteristics of aging, as strong of fiber products.

Processing methods:
Suitable for injection molding, blow molding and extrusion molding and other processing methods.

Application:
For all types of products such as shoes, industrial casters, hose, cable sheathing, film, advanced accessories, medical equipment and sports equipment.
 

Physical Properties	Testing method	unit	E480A	E485A	E490A	E495A	E498A	E464D	E472D
Specific Gravity			1.21 ± 0.02	1.22 ± 0.02	1.22 ± 0.02	1.22 ± 0.02	1.23 ± 0.02	1.24 ± 0.02	1.25 ± 0.02
Hardness		ShoreA ShoreD	80 ± 3	85 ± 3	90 ± 3	95 ± 3	55 ± 3	64 ± 3	72 ± 3
100!%Modulus		Kg/cm2	50	70	90	110	150	180	220
Tensiles Strength		Kg/cm2	350	380	400	450	450	500	550
Elongation at break		0/0	500	450	450	420	400	350	320
Tear Strength		Kg/cm2	85	95	105	125	150	180	200
70 degree permanence Compression Set		0/0	32	35	38	40	45
Abrasion Loss		Mg	30	32	35	40	50	60	60
Polyol	Polyester ( Normal Polyester )   Anti-Temperature : -30 degree  -80 degree
Testing Condition   Pull Strength Testing: extruding and forming 2mm trial sheet, after 100degree *16 heating and then testing. Abrasion: Tober abrasion Wheel H-22, Weight 1kgs, Turning 1000 Circles *Above data just for Reference.