TPU film
Categories
TPU film; TPU waterproof membrane; TPU transparent membrane; TPU translucent membrane; TPU fog Film.
Text:
a) New green materials for application of waterproof breathable fabric which is a major breakthrough that overcomes many of PVC and PU leather defects. It not only has the majority of rubber and plastic properties of ordinary, but also has excellent comprehensive physical and chemical properties, it is also known as the future material.
b) wear and tear of the good, good bending strength, tensile strength, elongation at break large, low temperature, long-term deformation rate, oil resistance, aliphatic solvents, resistance to hydrocarbon solvents , oxygen and ozone and anti-aging properties.
c) TPU transparent film,
Application: shoes, bags, handbags, clothing, medical, military, toys,
Thickness: 0.02MM -0.2MM
Advantages: high strength, high tear strength, high oil, low compression, high flexibility, high soft.
d) TPU waterproof membrane
Color: matte, white, color, black.
Thickness: 0.02 MM- -0.2MM
Uses: Clothing, Shoes fabric laminating, underwear accessories.
Advantages: high resistance to water pressure, high moisture permeability, feel good, good processing performance, washable dry-cleaning.
e) hot melt adhesive film
Uses: Shoes, clothing, waterproof zippers, trademarks, computer woven label, embroidery.
Advantages: a adhesive material for bonding the two same or different materials, with a variety of fabrics, laminated plastic, (which can be hot lamination, melting point 120 degrees --- 80 degrees)
Properties : No glue when bonding, solvent free, environmentally friendly non-toxic, washable, dry, soft to the touch.
f) High-temperature membrane
Uses: filling water bags, inflatable bags, foam composite products.
Advantages: high wear resistance, high tear strength, high durability, resistance to bacterial invasion, resistance to hydrolysis.
Applications
TPU film applications:
1, transparent dressing;
2, transparent wound dressings;
3, non-woven wound dressings;
4, waterproof, breathable non-woven dressing paste;
5, applicator;
6, catheter fixation paste;
7, catheter fixation paste;
8, infant navel paste;
9, PU Band-Aid;
10, transparent film roll;
11, S linear material;
12, PVC foam membrane material;
13 Adhesive Tape
14, PU patch to the base material;
15, thin film surgical towels;
16, all kinds of adhesive
17. Composite fabrics
Keyword
TPU film; TPU film; TPU wate TPU Film, TPU Waterbproof and Ventilate Film, TPU Transparent Film, TPU translucency Film, TPU Frosting Film, Plastic Film, Film
Properties
| |
| Physical Properties |
Testing Methods |
Units |
3F-S0085 |
3F-S0385 |
3F-S0585 |
3F-S0095 |
3F-R0585 |
3F-R0685 |
| Hardness |
ASTM D2240 |
Shore A |
85±2 |
85±2 |
85±2 |
95±2 |
85±2 |
85±2 |
| Specific Gravity |
ASTM D297 |
|
1.22 |
1.22 |
1.22 |
1.23 |
1.20 |
1.19 |
|
300% Modulus |
ASTM D412 |
Kg/cm2 |
Horizontal Warp:92
Vertical Weft:87 |
Horizontal Warp: 62
Vertical Weft: 75 |
Horizontal Warp:95
Vertical Weft:80 |
Horizontal Warp:179
Vertical Weft:145 |
Horizontal Warp:85
Vertical Weft:80 |
Horizontal Warp:111
Vertical Weft:130 |
| Tensile Strength |
ASTM D412 |
Kg/cm2 |
Horizontal Warp:380
Vertical Weft:365 |
Horizontal Warp:356
Vertical Weft:362 |
Horizontal Warp:430
Vertical Weft:385 |
Horizontal Warp:410
Vertical Weft:400 |
Horizontal Warp:350
Vertical Weft:365 |
Horizontal Warp:365
Vertical Weft:408 |
| Elongation |
ASTM D412 |
Kg/cm2 |
Horizontal Warp:450
Vertical Weft:435 |
Horizontal Warp:858
Vertical Weft:719 |
Horizontal Warp:460
Vertical Weft:455 |
Horizontal Warp:405
Vertical Weft:385 |
Horizontal Warp:567
Vertical Weft:602 |
Horizontal Warp:605
Vertical Weft:570 |
| Tear Strength |
ASTM D1004 |
Kg/cm |
Horizontal Warp:100
Vertical Weft:129 |
Horizontal Warp:108
Vertical Weft:109 |
Horizontal Warp:95
Vertical Weft: 105 |
Horizontal Warp:135
Vertical Weft:150 |
Horizontal Warp:105
Vertical Weft:117 |
Horizontal Warp:110
Vertical Weft:105 |
| UV Light Discoloration |
ASTM D4329 |
Grade |
3-4 |
4↑ |
3-4 |
3-4 |
3-4 |
4↑ |
| Flex,Ross |
|
cycles |
100,000↑ |
100,000↑ |
100,000↑ |
100,000↑ |
100,000↑ |
100,000↑ |
| Melting Point |
|
ºC |
160-185 |
165-190 |
170-195 |
190-210 |
170-190 |
175-195 |
| High Frequency Welding |
D1148 |
|
Easy |
Good |
Good |
Hard |
Easy |
Good |
| Sample Thickness |
|
mm |
0.7 |
0.7 |
0.7 |
0.7 |
0.7 |
0.7 |
Special note:
1. Thickness: 0.012 -6.0mm -6.0mm
2. the hardness range: 60 - 90 Shore A
3. the wide range: 2500mm 2500mm The following can be modulated
4. the film colors: Color can play, but need to beat the amount of color charge and minimum order
5. the film does not contain plasticizers, wax, and will not spit from the powder, resulting in surface aerosol
6. high frequency welding, ultrasonic welding, pressing and other processing methods for mold TPU film processing.
7. it is recommended to use humor printing TPU TPU film, and may require pre-processing of TPU films
8. films to do embossing, plating, flocking and other treatment, suitable for all types of new product development more options
|
|
| Waterproof & Breathble Film |
| |
Physical Properties |
Testing Methods |
Units |
3F-S1001M |
3F-S1001GW |
3F-R0602M |
3F-R0602GW |
3F-R1003M |
3F-1003GW |
| Thickness |
ASTM D1777 |
mm |
0.012 |
0.015 |
0.012 |
0.015 |
0.015 |
0.015 |
| Width |
ASTM D3774 |
inch |
60 |
60 |
60 |
60 |
60 |
60 |
| Specific Gravity |
ASTM D297 |
|
1.22 |
1.23 |
1.2 |
1.21 |
1.2 |
1.21 |
| M.V.P |
ASTM E96 BW-2000 |
g/m2 /day |
1200 |
1000 |
8000 |
7000 |
12000 |
10000 |
| W.P.R |
JIS L 1092B |
mm/H20 |
10000 |
10000 |
10000 |
10000 |
10000 |
10000 |
| Color |
|
|
Mist Transparent |
Mist Transparent White |
Mist Transparent |
Mist Transparent White |
Mist Transparent |
Mist Transparent White |
| PE PE Carrier |
|
|
N/A |
N/A |
Yes |
Yes |
Yes |
Yes |
Special note:
1, the proposed thickness: 0.012 -0.03mm -0.03mm
2, the maximum width: 2000mm 2000mm ( ( 78.7 in 78.7 in ) )
3, breathable principle: hydrophilic breathable moisture transfer
4, cold: - 30 ºC 30 ºC
5, washable, but recommended washing temperature does not exceed 40 ºC 40 ºC
|
|
| |
| Item |
Units |
3F-HM4760 |
3F-HM4761 |
3F-HM4765 |
3F-HM4769 |
3F-HM4860 |
3F-HM4761 |
3F-HM4765 |
| Thickless |
mm |
0.06-0.25 |
0.06-0.25 |
0.05-0.15 |
0.06-0.25 |
0.08-0.15 |
0.1-0.3 |
0.08-0.25 |
| Width |
mm |
48-110 |
48-110 |
48-110 |
48-110 |
47-94 |
47-94 |
48-95 |
| Base Material |
|
PA |
PS |
TPU |
PO |
|
|
TPU |
| Melting Point |
ºC |
115 |
110 |
150 |
95 |
140 |
120 |
150 |
| Machining Point |
ºC |
150 |
150 |
180 |
145 |
170 |
160 |
180 |
| Machining Time |
s |
16 |
15 |
20 |
12 |
15 |
15 |
20 |
| Use Range |
|
Gum Embroidered |
Conductive fabric Flocking |
Elastic fabrics |
Trademark Leather |
Metal-specific |
Nylon Di Lun |
Elastic fabrics |
| Carrier |
|
Single silicon release paper |
Single silicon release paper |
Single silicon release paper |
Single silicon release paper |
GLASSIN paper |
GLASSIN paper |
GLASSIN paper |
Special note:
1, the thickness error: ± 0.007mm 0.007mm
2, the substrate material: single-oriented silicon release paper and GLASSIN release paper, PE film can also be substrates
3, the washing performance: general suitable for general washing and general. And the need for bonding the fabric on, and recommends specific experiment to confirm
4, hot temperature and pressure of hot pressing time is only recommended processing conditions, and the pressure of hot equipment and materials to be bonded thickness, thermal conductivity, pressure to have relations, and recommends specific experiment to confirm
5, silicone (SILICON), water-based PU, U.S. Naming, rice, Teflon (PTFE), rubber, fabric sizing handle, PP, PE, PET can not be used Dengjun
|
|
| |
Hot Melt Adhesive |
| |
| Item |
Units |
3F-HM5162 |
3F-HM5163 |
3F-HM5164 |
3F-HM5167 |
| Thickless |
mm |
0.02-0.15 |
0.02-0.15 |
0.02-0.15 |
0.02-0.15 |
| Width |
mm |
900-1524 |
900-1524 |
900-1524 |
900-1524 |
| Base Material |
|
EVA |
PO |
POLYESTER |
TPU |
| Melting Point |
ºC |
110-130 |
120-150 |
130-150 |
160-180 |
| Machining Point |
ºC |
120 |
130 |
140 |
170 |
| Machining Time |
s |
10 |
10 |
10 |
10 |
| Use Range |
|
EVA/PE/TPO/SPAN TEXTILE/POLYESTER |
EVA/PE/TPO/NYLON/POLYESTER |
PU/TPU/POLYESTER |
PU/TPU/SPAN TEXTILE/POLYESTER |
| Carrier |
|
N/A |
N/A |
N/A |
N/A |
Special note:
1, the thickness error: ± 0.005mm 0.005mm
2, the substrate material: no substrate materials, processing more convenient and more cost reduced.
3, the washing performance: general suitable for general washing and general. And the need for bonding the fabric on, and recommends specific experiment to confirm
4, hot temperature and pressure of hot pressing time is only recommended processing conditions, and the pressure of hot equipment and materials to be bonded thickness, thermal conductivity, pressure to have relations, and recommends specific experiment to confirm
5, silicone (SILICON), water-based PU, U.S. Naming, rice, Teflon (PTFE), rubber, fabric sizing handle, PP, PE, PET can not be used Dengjun
|
|
Company Profile
Base Info
Company Name: Shenzhen Pepson Industrial Co., Ltd.
Type of Ownership: Limited Company
Country/Region: China
Province/City/District: Guangdong , Shenzhen, Nanshan
Address: Rm 2117, International Mayor Communcation Center, East Road, Shahe, Nanshan Area, Shenzhen, Guangdong, China
Zip/Post Code: 518000
Telephone: 86 - 755 - 86100788
Fax: 86 - 755 - 86101518
Registered Capital: 1300000 RMB
Plant Area: >2000 square meters
Website: http://pepsonpu.en.made-in-china.com Member Icon
Bussiness Info
Business Range: Auto, Motorcycle Parts & Accessories , Chemicals , Manufacturing & Processing Machinery , Textile , Tools & Hardware , Transportation
Management Certification: ISO 9001
Main Products: Polyurethane Belts,Rubber Products,PU Sheet,PU Timing Belt,PU Rod,Conveyor Belt,PU Rough Round Belt,PU V-Belt,PU Squeegees,TPU Material
Industrial Zone:>2000 square meters
Profile: Since its foundation in 1998, SHENZHEN Pepson Industrial Co. Ltd is specialized in research and bulk manufacture of various polyurethane Elastomer, Rubber, Unsaturated Resin and Machinery Parts, which are widely used in many Industries such as Chemical, Electronic, Textile, Ceramic, Glass Industries etc. Our company follows the principle that Technology is in advance of Company Development.
International advanced PU Production Line, professional analysis, experiment, testing Equipments etc are introduced to our company from Japan and Germany successively. With these technologies, our quality is one of the highest classes in domestic same field. In order to meet the market needs and with our company development, we engaged in Lamp Manufacture in 2000 and set up Research and Production Base in Guzhen, Zhongshan. The Manufacture factories are successively set up in Shenzhen, Shanghai, Foshan and Zhongshan respectively. There are also special sale agents in Shenyang and Chengdu. Each product occupies a stable portion in domestic market. They are also sold to America, South East Asia, Middle East and Europe etc.
Manage Licenses: Business License
Registration No.: 440301103033362
Delivery:
Could delivery by Sea,Air,Courier,Such as DHL ,TNT,FEDEX Just as you need.
Audited Supplier 
){kind=link}